BUCKER JUNGMIESTER PROJECT • $14,000 • FOR SALE • Homebuilt Jungmiester Project blt by Jim Swick Fuselage Fin, Rudder, wing fittings, Tailw, Gas tank. • Contact John H. Price located Mt Calm, TX USA • Telephone: 254-993-2024 • Posted January 1, 2014 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AD

 

I need this instrument, not necessarily  functional, because as the housing is broken. See picture!

Thomas Blumenthal
This email address is being protected from spambots. You need JavaScript enabled to view it.

tachtb.jpg

HIRTH 504PRICE REDUCED Hirth 504. No logs.Turns freely. Needs overhaul. Oiled. Very nice. Rare. 10,000 USD or near offer • Contact Jeffrey Thomas, Owner - located Arlington, WA USA • Telephone: +1-425 501-6250 • Posted December 4, 2013 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures




WARNER ENGINE PARTSACCEPTING OFFERS Warner parts. All parts inspected and tagged as airworthy by Bolduc or Harrison. A partial list: Warner 185 power case, accessory case, induction housing (unobtanium) and 7 NEW cylinders (unobtanium) as a matched set. I 185 cylinder O/h'd standard steel by Harrison. 3 165 power cases. 2 accessory cases, 1 additional induction housing. 6 165 cylinders....4 in +.0.10 and 2 in +0.20. O'H'd crankshafts, rockers, new main bearings, and valves (new). I am interested in Siemens Sh14a4 or 145 Warner parts in trade. Cash also works well. Steve Craig. 785.423.1000 cell or 785.841.3100 office. • Contact Stephen J. Craig, Owner - located Lawrence, KS USA • Telephone: 785.841.3100 . • Posted November 22, 2013 Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger Pictures




HIRTH 504 • FOR SALE • Hirth 504. No logs.Turns freely. Needs overhaul. Email for pics. Serious offers only • Contact Jeffrey Thomas, Owner - located Arlington, WA USA • Telephone: +1-425 501-6250

We are looking for a good condition (flyer or close to) CASA Jungmann, preferably with the original Tigre engine.

Please contact:
Lars Ness
This email address is being protected from spambots. You need JavaScript enabled to view it.
Ph. +4792443910

sp-yfb_-_for_sale.jpg

Air Res Aviation would like to offer a Bücker Jungmann (SP-YFB) ready to fly!

Details here: http://www.planecheck.com/?ent=da&id=20710

Please don't hesitate to contact us.
e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

---
Pozdrawiam / Best regards,
Radek Bocheński
Junior Technical Specialist

Air Res Aviation Sp. z o.o.
36-002 Jasionka, POLAND
VAT: PL5170311629
Office phone: +48 607 582 861

Its amazing that after 80 years, there are still multiple sources of parts for Bucker aircraft, with new ones appearing from time to time. Here are two such sources you should be aware of:

As reported previously, the estate of the late Marcus Bates includes many, many Bucker components obtained from Spain over the years. These are illustrated here. Each picture is labeled with the name of the part(s). Please enquire with Brian Karli This email address is being protected from spambots. You need JavaScript enabled to view it. for prices and availability.

part-sample.jpg
A sample of some of the parts available from the Marcus Bates estate. Several Tigre engines are also available.

The second new source of parts is Air-Res Aviation in Poland. Air-Res even have a web site with an on-line Bucker parts store!

Visit this URL to view or order what you need. http://www.sklep.air-res.pl/

airframe.jpg

Radek Bocheński This email address is being protected from spambots. You need JavaScript enabled to view it. can answere any questions you may have. Radek speaks excellend English.


For Sale - Bucker Jungmeister Project.  Exact copy of a Spanish Jungmeister fuselage constructed by Charlie Miller.  Beautiful workmanship.  Asking $35,000 USD. 

New Jungmeister fuel tank. Original Spanish landing gear.  Jungmann tail surfaces.  Jungmann wings for fittings.  Jungmeister center section.  Never registered in the US.  Lycoming engine mount.  Fiberglas bump cowling.

homebuilt-jm-1.jpg



For more info, email:   Brian Karli -  This email address is being protected from spambots. You need JavaScript enabled to view it.


-- SOLD --

This is the first of a series of advertisements for aircraft and parts from the Marcus Bates collection. To see more, go to the picture gallery and select "Jungmann parts for sale". Brian Karli will be helping the family with the sale of the estate, so please contact Brian directly if interested.


For Sale - Bucker Jungmeister.  Spanish S/N 13.  Built 11/2/37  Retired from Spanish Air Force 11/20/58.  185HP Warner Engine.  Asking $78,000 USD

-Fuselage professionally restored by Charlie Miller. Modernized landing gear, Jungmann tail surfaces.  Covered in the 1990's.  Swiss paint scheme. Needs an instrument panel and instruments. Never flown or registered in the US.
-New wings built in 1990's
-Warner engine overhauled by Pappy Spinks.  Engine purchased from Harold Krier's who used it in his famous Krier Craft. Wooden Sensenich propeller.  Mags and carburetor not installed but available.  No exhaust.  No logs. Fiberglas cowl not yet installed.

For more info, email:   Brian Karli -  This email address is being protected from spambots. You need JavaScript enabled to view it.



Many more pictures can be found by clicking here. Look for the pictures called "JM 1" through "JM 2".
-- U99 has been sold and will be moving to a new home in Italy.  --

I am getting on well with my new Jungmeister and have decided to put U99 on the market.
It is advertised at http://www.planecheck.com?ent=da&id=21519

Genuine Dornier built example, original and unmolested, regular flyer, logs since manufacture, serial # U99, Go to www.realaero.com or here for pictures.

u99.jpg

Engine Siemens Bramo Sh14a, approx 50 SMOH. If you want an original Jungmeister with an impeccable pedigree this is it. But she's not cheap. Available in July, fly away.

Enquiries by e-mail please.

Taff Smith
This email address is being protected from spambots. You need JavaScript enabled to view it.
Hi,

I have a Walter Minor 4 III engine completely unused for sale, and also 3 incomplete engines, 2 propellers and accessories unused. if you are interested please contact me.

Regards

This email address is being protected from spambots. You need JavaScript enabled to view it.

BUCKER JUNGMEISTER • $84,500 • WOW! • One-of-a-kind plane built from famous airshow pilot Frank Price's plans. Built by Jim Swick (EAA Hall of Fame builder) in 1997. Built for the M-14P 360HP. 1527 empty weight 1800 pounds of thrust! Modernized in 2012 with new panel, 3-Blade MT Prop ($19,500), Kimball engine upgrades, Cleveland brakes. About 120 total time AF&E. Garmin 560 GPS, GTX 327 Transponder, GT-50 Flight Data, FlightLine FL-760 Comm, Digiflight Autopilot (not calibrated). 64 gallons, Hooker Harness, smoke. Nov inspection. This was thoroughly gone through and reworked by a qualified team! Contact Greg Koontz 205-616-8176 • Contact Greg B. Koontz - GREG KOONTZ, Friend of Owner - located Ashville, AL USA • Telephone: 205-616-8176 . • Fax: 205-594-4207 • Posted April 25, 2013 • Display Specs Page Show all Ads posted by this AdvertiserRecommend This Ad to a FriendEmail AdvertiserSave to WatchlistReport This AdView Larger PicturesFinance New Lower Rates!Advertisement




Canadian Jungmeister project aircraft for sale. CF-CQQ Built By C.G. Holmes / V. Peterson 1970. Removed from Canadian registry Sept. 1995 for static display. Meticulously stored since.

cf-cqq.jpg

770 Hrs. TTAF c/w all original logs. Cleveland wheels and brakes.

Original Lycoming 360 as well as all instruments have been removed and are not available. Airframe has been unofficially inspected and to the knowledge of the seller it is in excellent condition. This aircraft is currently in storage near Vancouver B.C.
  
A person who assisted with the construction of the wings remembers that they were built from Frank Price plans.

For serious inquiries contact :

Barry Henderson
This email address is being protected from spambots. You need JavaScript enabled to view it.   
Phone 250-395-1227
I just finished these Jungmeister seat belt attachments for Joe Krybus.  If anyone else needs a set, I got them figured out!  The steering cables are next.

Contact me at This email address is being protected from spambots. You need JavaScript enabled to view it. if you need some.

Brian.

wire2.jpg

wire3.jpg

wire4.jpg

I have for sale:
  • Front and Rear Windsceen
  • New Rudder to Tailwheel Wires
  • New Complete set of flying wires
  • Tailwheel Lock assy
  • Complete set U/c Springs
  • Oil temp Gauge (new)
  • Magnetos Left and Right
  • 5 vaned Oil Pump (new)
  • Z type 3 vaned Oil Pump (new)
  • Engine Fuel Pump (new)
  • Propeller Hub
  • Starter Motor

Plus many more Parts. I also know of a large quanity of parts in Spain including a zero timed 125 hp Tigre Ex Factory.

This email address is being protected from spambots. You need JavaScript enabled to view it.
+441628 621804    
+447885452094 
Near London, UK

i am looking for a 150 HP tigre...either a core or overhauled.

Would you please contact me if you know of one?

This email address is being protected from spambots. You need JavaScript enabled to view it.
1 (863) 899 1617

-- SOLD --

Newly built by Master Bucker builder of Santa Paula, CA., Joe Krybus. 
Absolutely perfect in every detail and ready for cover.
I want to see these wings go to a good home.....large discount from replacement cost to a Bucker Member.

scaled.wings-jk1.jpg

scaled.wings-jk2.jpg

scaled.wings-jk3.jpg

Please contact:
This email address is being protected from spambots. You need JavaScript enabled to view it. ,  785.841.3100 office or 785.423.1000 cell
-- The Jungmeister has been sold --


I have listed my original Rangsdorf Bucker 133C Jungmeister, built in 1937, at www.planecheck.com
 
Link is listed below.
 
Maybe this is of interest to the Bucker community.

ressle.jpg
 
http://www.planecheck.com?ent=da&id=20637

Mit freundlichen Grüßen / With best regards

Paul F. Ressle
 
paul ressle GmbH & Co. Spedition KG
Peitnachstr. 2-6
86956 Schongau
Tel. 0 88 61 / 23 41 - 13
Fax:0 88 61 / 23 41 - 16
This email address is being protected from spambots. You need JavaScript enabled to view it.
www.ressle-spedition.de

The following items are available for sale:

  1. Lycoming cross over exhaust. This has been sitting in hangar for many years, looks good, just needs  good clean.
  2. Bucker Lycoming engine mount. (At least it appears as such. it has not been tested. Exact dimentions can be provided)

Fair offers are invited. I would just like to clear out the hangar.
 
exhaust.jpg mount-1.jpg

mount-2.jpg

This email address is being protected from spambots. You need JavaScript enabled to view it.
COO
International Print and Packaging
512 515 6333 x 202
Update:

Bucker Prado were able to supply the pins.

pins.jpg

Both Brian Charters and Martin de la Harpe are in need of a set of four wing retaining pins. BP part number 134/18 or "Pasador BuN 152 34"

If you have any pins you can spare, please This email address is being protected from spambots. You need JavaScript enabled to view it. . I am sure between us we can find sufficient pins to get these two Buckers in the air.

Steve