Fournier Forums | Thread

New Forum

THIS FORUM IS NOW CLOSED/REPLACED DUE TO LACK OF TECHNICAL SUPPORT. YOU MAY STILL BROWSE AND READ POSTS, BUT YOU MAY NOT POST OR REPLY. YOUR CURRENT PASSWORD SHOULD WORK ON THE NEW SITE.

Please visit the new forum at New Fournier Forum

Important notice

Please remember that people from all over the world read and post on this forum, and that every country has its own rules, regulations and standards. This forum is based in the USA and so much of the information posted here is for the benefit of people who operate aircraft in the experimental/exhibition or experimental/racing categories. Advice given on this forum may be region specific. A person from Europe, for example, may make suggestions perfectly appropriate for a U.S reader, although not acceptable in his home country!

Please take this into account and carefully consult the authorities, standards and approved documentation where you fly.

Fournier Forums

\|- Fournier Aircraft > Miscellaneous	Post New Topic Post A Reply
building RF4	printer friendly version next newest post \| next oldest post

Author	Messages
philippe Unregistered	Posted Tuesday, November 10, 2009 @ 05:00 PM hello you can see the pictures of building RF4 below: http://rf4replica.e-monsite.com this site is on progress. if someone has some modifications to give me about building, you can contact me on : phi.julien@free.fr
Collin Unregistered	Posted Saturday, November 14, 2009 @ 12:15 PM Hello Philippe, Your workmanship is first class. Collin
philippe Unregistered	Posted Tuesday, November 17, 2009 @ 04:44 PM hello collin. I take your compliment for encouragement. thanks a lot.
Jorgen Unregistered	Posted Saturday, December 5, 2009 @ 04:36 AM Salut Philippe, I agree with Collin, the parts you manufactured look very nice. I think it´s absolutely fascinating to see the different RF parts "commes des études de nue" (in the nude). Since I have some woodwork ahead of me (see Maintenance- RF 5b repair thread) it is encouraging for me too to see your work. Do you use steaming for the bent parts? Philippe, please keep updating your nice webpage as you go, we all admire your work. May the 4´s be with you/ Jörgen
philippe Unregistered	Posted Saturday, December 19, 2009 @ 10:57 PM Hello jorgen thank you for your message. During all the december month the website do not update because now I enjoy holydays in sun. during january you will see frame fuselage step by step. thanks a lot.

Post New Topic Post A Reply

Jump to:

All times are GMT -4 Hours.

Welcome to The Fournier Forum, Guest!

Username	:
Password	:

In order to fully utilize the abilities of this board, you are required to register as a member. Registration is free, and allows you to do lots of things including turning on or off certain features of this board. Register now!

Forum Rules & Description

Who Can Read The Forum? Any registered user or guest
Who Can Post New Topics? Any administrator or moderator
Who Can Post Replies? Any administrator or moderator
Who Can Edit Posts? Any original author

For RF Motorglider news and other stuff

Currently Active Users: 104

There are currently 0 members and 104 guests on the boards. | Most users ever online was 42535 on 04-07-2026 02:43 AM

Search This Forum

Search Keywords:	Search From: