Posted by Markku on Tuesday, August 4, 2015 @ 03:39 AM:
I had problems to load pictures, so Steve helped me. These pictures are taken on mid June, first "Roll Out" from the hangar
[Edit by Markku on Thursday, August 6, 2015 @ 01:35 AM]
Posted by Bob Grimstead on Wednesday, August 5, 2015 @ 04:44 PM:
Markku, she is SO beautiful!
You have done a wonderful job of repair, restoration and re-build.
I hope you now have very any happy hours of flying in her.
Relax, and enjoy those magnificent Fournier skies.
Yours, Bob
-------------------- Flying and displaying Fournier RF4Ds VH-HDO and G-AWGN, building replica RF6B G-RFGB and custodian of RF6B prototype F-BPXV
Posted by Jorgen on Wednesday, August 5, 2015 @ 09:49 PM:
Markku,
that is absolutely fantastic!!! I'm so impressed with your work and your determination, congratulations to saving another example of the most magnificent aircraft ever built to posterity!!!
Can you tell us how you corrected the roll to the right?
May the 4's be with you/ Jörgen
[Edit by Jorgen on Wednesday, August 5, 2015 @ 09:50 PM]
Posted by Markku on Thursday, August 6, 2015 @ 01:58 AM:
Thank's Bob and Jörgen.
So far everything is OK, first flight was on 8th oh July. I was bit excited before the first flight, because in previous fast ground runs I had some problems with the engine, it dropped rpm in the in a bumpy part of the runway, but the reason was only very small amount of fuel, because of the lousy weather in Scandinavia it wasn't possible to test everyday, but in the morning that day I was able to test again, and it worked well.
There seems to be some more power in 1400cc engine than in our club plane, mine climbs better, and it's also little bit faster, so far I have flown only some 4 hours, some adjusting and fixing need to done continuously.
I don't need a trim tab in aileron, she goes straight and steady!
Yours, Markku
Posted by Bob Grimstead on Thursday, August 6, 2015 @ 04:51 AM:
Hi Markku.
I think you will discover that your extra performance is not so much because of your engine, but from that Hercules propeller.
They make a very noticeable difference in performance, and I think you will also notice slightly reduced fuel consumption.
Enjoy your super Fournier.
Yours, Bob
-------------------- Flying and displaying Fournier RF4Ds VH-HDO and G-AWGN, building replica RF6B G-RFGB and custodian of RF6B prototype F-BPXV
Posted by Markku on Thursday, August 6, 2015 @ 11:24 AM:
Hi Bob
I agree, propeller works fine with the engine, I have not yet made any exact calculations about the performance or the fuel consumption, but so far it looks promising
Markku
Posted by D. Porter on Thursday, August 6, 2015 @ 12:50 PM:
Hi Markku,
Nice work, I love the color!
If you get the opportunity, could you post a few more pictures of the cockpit and engine?
Don
-------------------- Don
RF4D #4054 N1700F Rectimo 1400cc
Posted by Collin on Thursday, August 6, 2015 @ 08:29 PM:
Hi Markku,
Looks great. I need to start on mine. The decals also look nice.
Collin
Posted by Markku on Saturday, August 8, 2015 @ 02:15 AM:
Quote: | | Originally posted by D. Porter
Hi Markku,
Nice work, I love the color!
If you get the opportunity, could you post a few more
Don
|
|
Hi Don
At the moment I dont have good pictures of the cocpit and Engine, but I will take some next week, and hope that Steve can help uploading them
Markku
Posted by Donald on Sunday, August 9, 2015 @ 02:05 AM:
Looks lovely Markku. Congratulations.
And yet another variation on outrigger legs. I've seen quite a few variations on the theme but none like those. Are they original?
Posted by Markku on Monday, August 10, 2015 @ 03:29 AM:
Hi Donald
They are not original, but this is close to type which we have used in our club planes. When I made the drawings for the outriggers, the guy who made them, didn't follow exactly the drawings, actually those should have been little bit longer and more curved to have better flexibility, anyway I managed to modify them to fit in to original fixing points
Markku
Posted by dannparks on Thursday, August 13, 2015 @ 06:27 PM:
Beautiful job Markku. A real pride and joy. I like the clean and tidy panel. There is a radio - correct? Any chance to see the rest of the panel?
Congratulations,
Dann
-------------------- Dann Parks • RF4D #4051 N2188 • now flying!
Pictures at: https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1
Posted by Markku on Saturday, August 15, 2015 @ 10:16 AM:
Thanks Dann
I will try to send some more pictures in the end of next week
Markku
Posted by Markku on Friday, February 9, 2018 @ 06:05 AM:
Test to load pictures, seems to work nicely
[Edit by Markku on Friday, February 9, 2018 @ 06:10 AM]
|