Important notice
Please remember that people from all over the world read and post on this forum, and that every country has its own rules, regulations and standards. This forum is based in the USA and so much of the information posted here is for the benefit of people who operate aircraft in the experimental/exhibition or experimental/racing categories. Advice given on this forum may be region specific. A person from Europe, for example, may make suggestions perfectly appropriate for a U.S reader, although not acceptable in his home country!

Please take this into account and carefully consult the authorities, standards and approved documentation where you fly.
Fournier Forums Upload picture | User Cp  |  Register  |  Members  |  Search  |  Help
    |- Fournier Aircraft > Modifications Post New Topic   Post A Reply
Todds Canopy on N2188 printer friendly version
next newest post | next oldest post
Author Messages
dannparks
Sergeant Major

Gender: Male
Location: Parkside Airpark, Battle Ground, WA
Registered: Oct 2006
Status: Offline
Posts: 391

Click here to see the profile for dannparks Visit https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1 Send email to dannparks Send private message to dannparks Find more posts by dannparks Edit or delete this message Reply w/Quote
Posted Thursday, June 14, 2012 @ 02:25 PM  

It finally warmed up enough around here to attempt to do the canopy. So far, I'm happy with the results.

First, let me restate that Todds Canopies are blown, not draped over a form like the original canopy. Because of this, they have a very different shape than the original. I had this one made with extra headroom, but the blowing process also makes it bulge out a bit on the sides. Even one made without extra headroom will probably bulge out a bit. The shape is also more rounded in profile on the top, whereas the original follows the lines of the fuselage forward and then curves sharply down in the front. So, if you want the original shape, you need to get a draped canopy made from an RF4D canopy plug. That said, I needed to have the extra headroom, so there wasn't really a choice.

There are probably many different ways to do the job, but this is how did this one – based in large part on my experience mounting the canopy on my RV-6A:

The first part of the process is fitting the empty frame so it closes without having to pull or twist it and so that there is exactly a 3/8" gap all around. This will assure that the frame is perfectly straight and you can use it as a guide to cut the plastic. If you match the plastic to a crooked frame, the finished canopy will not fit properly. This is the most critical part of the process and I spent a lot of time bending and tweaking the frame.

Once the frame is straight, you can place it inside the plastic bubble. The handle sticks out on one side and the hinges stick out on the other, so you will need to make cutouts for them. The cutouts are critical for the correct fit. The bubble shape fits the frame OK in the front, but in the rear, the frame is tall and the bubble is round. Mark a centerline on the frame front and back and on the bubble to help with alignment. Gently push the plastic against the rear part of the frame until you can ascertain where the cuts for the handle would go and mark the cuts. Do not mark the hinge cuts at this time.

I used a ผ” round file (and elbow grease) to make the 2 cuts for the handle. Once you can fit the side with the handle, wrap and gently clamp the plastic all around the frame to determine where the cutouts for the hinges will be, and mark those as well as the emergency release lever.

Once the hinge cuts are made you can gently clamp the entire canopy to the frame. You should not need to twist the frame to make it fit, if so, then trim the cutouts. I put some popsicle sticks along the frame to simulate the thickness of the “tail” on the rubber P-strip I planned to use.

At this point, mark the holes through the plastic. Use a step drill to drill them (never a regular drill). Make the holes oversize to allow for expansion on the bubble. When the bubble screwed loosly to the frame, mark 3/8" around the frame on the extra plastic and trim it off with an air cutter with a very thin cut-off wheel. Never use any kind of toothed saw.

For the first fitting it may be tight and have some interference. This is good, just keep trimming (disk, files, sandpaper) it till it goes on and closes properly. Then mark for a nice an even 1/8” gap between the plastic and the fuselage and do the final trimming.

One problem I discovered is that since the bubble is very rounded and tucks in at the bottom, I need to put some shims along the bottom frame rail to make the bubble align with the outside of the fuselage. Maybe Todds can change their blowing technique to help reduce the rounding at the bottom.

I have not put in the P-strip yet. It is an Aircraft Spruce item #05-00020. I also plan to use the original screws and washers. I do not plan to put in a window, but I will add some pop-up air vents. As I said, this is how I fit this one, other people may have other techniques.

--------------------
Dann Parks • RF4D #4051 N2188 • now flying!
Pictures at: https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1

Jorgen
Captain

Gender: Male
Location: Lund, Sweden
Registered: Apr 2007
Status: Offline
Posts: 833

Click here to see the profile for Jorgen Send email to Jorgen Send private message to Jorgen Find more posts by Jorgen Edit or delete this message Reply w/Quote
Posted Thursday, June 14, 2012 @ 03:13 PM  

Dann,
thank you so much for that post, I just love the meticulous way you work your RF 4 towards perfection. I also note your great looking mufflers, please update on those and report how they work, I'm really interested in them and think they're a great idea!

I note you do not plan to put a window in your canopy. I hope you consider adding a proper opening option from the outside if not else for security reasons. Please keep us updated, it's very inspiring to follow your progress!

May the 4's be with you/ J๖rgen

dannparks
Sergeant Major

Gender: Male
Location: Parkside Airpark, Battle Ground, WA
Registered: Oct 2006
Status: Offline
Posts: 391

Click here to see the profile for dannparks Visit https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1 Send email to dannparks Send private message to dannparks Find more posts by dannparks Edit or delete this message Reply w/Quote
Posted Tuesday, June 19, 2012 @ 02:00 PM  

I would like to modify the latch to allow it to be opened and closed from the outside. Has anyone worked out such a modification or new latch design?

--------------------
Dann Parks • RF4D #4051 N2188 • now flying!
Pictures at: https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1

Bob Grimstead
Captain

Gender: Male
Location: Perth, Western Australia or West Sussex, England
Registered: Dec 2006
Status: Offline
Posts: 2027

Click here to see the profile for Bob Grimstead Visit http://www.redhawksduo.co.uk Send email to Bob Grimstead Send private message to Bob Grimstead Find more posts by Bob Grimstead Edit or delete this message Reply w/Quote
Posted Thursday, June 21, 2012 @ 06:56 AM  

Hi Dann,

I also would like to be able to open my canopy from the outside without having that clear-view window.

Please would you start a new thread on this topic, because I think many owners who are not replacing their canopy (and therefore not reading this thread) would still like this mod.

Yours, Bob

--------------------
Flying and displaying Fournier RF4Ds VH-HDO and G-AWGN, building replica RF6B G-RFGB and custodian of RF6B prototype F-BPXV

dannparks
Sergeant Major

Gender: Male
Location: Parkside Airpark, Battle Ground, WA
Registered: Oct 2006
Status: Offline
Posts: 391

Click here to see the profile for dannparks Visit https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1 Send email to dannparks Send private message to dannparks Find more posts by dannparks Edit or delete this message Reply w/Quote
Posted Friday, July 6, 2012 @ 06:45 PM  

There have been some recent conversations about canopy vents in other threads. I thought I should put this here, since it's in context.

This the air intake I put in the canopy. It fits in a 2" hole. Not the nicest looking scoop, but it's small and easy to install. Can be rotated down for off. It's just on one side now, but I might put one on the other side later. They are from ACS. I am using the original low-profile air exit bubble at the upper back of the canopy.

--------------------
Dann Parks • RF4D #4051 N2188 • now flying!
Pictures at: https://picasaweb.google.com/111628310900713778468/RF4D_N2188?noredirect=1

Post New Topic   Post A Reply Jump to:
Contact Us | cfiamerica.com | Privacy Policy All times are GMT -4 Hours.
Welcome to The Fournier Forum, Guest!  
Login
Username :
Password :
In order to fully utilize the abilities of this board, you are required to register as a member. Registration is free, and allows you to do lots of things including turning on or off certain features of this board. Register now!
Forum Rules & Description
Who Can Read The Forum? Any registered user or guest
Who Can Post New Topics? Any registered user
Who Can Post Replies? Any registered user
Who Can Edit Posts? Any original author
How can you improve on perfection?
Currently Active Users: 87
There are currently 0 members and 87 guests on the boards. | Most users ever online was 822 on 08-01-2020 10:15 PM
Search This Forum
Search Keywords: Search From:
Powered by CuteCast v2.0 BETA 2
Copyright © 2001-2003 ArtsCore Studios