Important notice
Please remember that people from all over the world read and post on this forum, and that every country has its own rules, regulations and standards. This forum is based in the USA and so much of the information posted here is for the benefit of people who operate aircraft in the experimental/exhibition or experimental/racing categories. Advice given on this forum may be region specific. A person from Europe, for example, may make suggestions perfectly appropriate for a U.S reader, although not acceptable in his home country!

Please take this into account and carefully consult the authorities, standards and approved documentation where you fly.
Fournier Forums Upload picture | User Cp  |  Register  |  Members  |  Search  |  Help
    |- Fournier Aircraft > Propellers Post New Topic   Post A Reply
Hoffman three pitch prop printer friendly version
next newest post | next oldest post
Author Messages
Jorgen
Captain

Gender: Male
Location: Lund, Sweden
Registered: Apr 2007
Status: Offline
Posts: 833

Click here to see the profile for Jorgen Send email to Jorgen Send private message to Jorgen Find more posts by Jorgen Edit or delete this message Reply w/Quote
Posted Tuesday, June 10, 2008 @ 04:55 PM  

Hi Guys,
I couldn´t resist beeing the first to post in this section. Anyone else having trouble with pitch shifts with the Hoffman three pitch prop? I think I´m doing the shift according to the recommendations ín the manual (speed 110 km/h, 1500 rpm (if I remember correctly) and then one firm yank of the handle), but most of the time I have to make 3-4 tries before I get cruise pitch, that´s a success rate of about 30 %, not very impressive. Do I just need more practice or is there some adjustment that needs to be made?

Oh, and another thing. I find it´s a good idea to check the mechanism by feathering and un-feathering the prop prior to start-up. That way you ensure you have climb pitch when you take off. The runway gets kind of shorter if you try a take off with cruise pitch set....

Take 5(b) just 4 fun/ Jörgen, SE-UDI, SE-XST

andy1
Sergeant First Class

Gender: Male
Location:
Registered: Aug 2008
Status: Offline
Posts: 82

Click here to see the profile for andy1 Send email to andy1 Send private message to andy1 Find more posts by andy1 Edit or delete this message Reply w/Quote
Posted Thursday, June 12, 2008 @ 07:11 AM  

So you have one like in Grob G109? If so the HO-62 has different values. To cruise something like 1800-2200 RPM depending on the spring load of the system and to start idle = max 1300 RPM. The system is a pain in the ass if it's not functioning properly. First check that the two ball bearings that contact to the prop flange are OK. Next check that the assy (fork including the bearings) are just in line with the flange. Then check the fork moves far enough and then check the flange and the bearings have correct clearance (can't say any values by heart though...). The locking mechanism itself should be clean and moving correctly, but not too well oiled, because the lock tends to slip. If these adjustments are correct, the pitch should change with one sharp pull. You shouldn't need to pull full back and especially not to keep the handle back. Just a fast pull - not too much force - and release. If it won't work, something is still wrong.

-A-

--------------------
***** Antti Laukkanen, Helsinki, Finland - RF4D OH-371 - RF4D OH-370 - RF5 OH-386 *****

JamesB
First Sergeant

Gender: Male
Location: Near Seattle, WA; USA
Registered: Oct 2006
Status: Offline
Posts: 257

Click here to see the profile for JamesB Visit http://www.rf5b.com Send email to JamesB Send private message to JamesB Find more posts by JamesB Edit or delete this message Reply w/Quote
Posted Friday, June 27, 2008 @ 12:27 PM  

I am not sure why you are making a "sharp pull" or "firm yanks." At 2000-2200 rpm, I ease the handle out to feel the bearing engage, then ease it about another inch until I feel the mechanism "shift." 2000 seems a little easier on the mechanism. The bearings on the yoke are well lubed--so it doesn't matter if they ride on the plate a little longer.
Jorgen
Captain

Gender: Male
Location: Lund, Sweden
Registered: Apr 2007
Status: Offline
Posts: 833

Click here to see the profile for Jorgen Send email to Jorgen Send private message to Jorgen Find more posts by Jorgen Edit or delete this message Reply w/Quote
Posted Sunday, July 27, 2008 @ 08:26 AM  

Hi Guys,
thanks for the advices. I checked the mechanism according to Antti´s suggestion and it seems OK. The manual calls for 1900 rpm and 110 km/h when shifting. I tried the "easing out"-method instead of the "firm yank" and I find it easier to shift. Good tip James, especially coming from a yank

Take 5(b) just 4 fun/ Jörgen, SE-UDI, SE-XST

[Edit by Jorgen on Sunday, July 27, 2008 @ 08:37 AM]

jb92563
Second Lieutenant

Gender: Male
Location: Lake Elsinore, CA, USA
Registered: Mar 2007
Status: Offline
Posts: 583

Click here to see the profile for jb92563 Visit http://picasaweb.google.com/jb92563 Send email to jb92563 Send private message to jb92563 Find more posts by jb92563 Edit or delete this message Reply w/Quote
Posted Thursday, March 5, 2009 @ 12:53 PM  

I have been practising the shift of the 3 postition HO V-62R prop and the way the Grob manual describes it works easy and gently.

Starting in climb pitch at 1800 rpm or greater pull to cruise pitch.
At Cruise pitch less than 1200 rpm pull to climb pitch.

The trick is the speed at which you shift as there is a centrifical pitch change unit in the hub
that relies on the rpm to allow the proper change so get those rpms right at the shift and it
works easily.

Also I have found the instructions for changing the climb pitch setting if you are not getting the right top end rpms.

It is quite easy to do taking only minutes.

The difference in pitch between climb and cruise is not settable without replacing the adjustment ring parts as I understand it.

[Edit by jb92563 on Monday, August 1, 2011 @ 03:58 PM]

jb92563
Second Lieutenant

Gender: Male
Location: Lake Elsinore, CA, USA
Registered: Mar 2007
Status: Offline
Posts: 583

Click here to see the profile for jb92563 Visit http://picasaweb.google.com/jb92563 Send email to jb92563 Send private message to jb92563 Find more posts by jb92563 Edit or delete this message Reply w/Quote
Posted Monday, November 16, 2009 @ 08:06 PM  

There is a Hoffman 3 position prop for sale in the Grob109 yahoo group.
(climb, cruise, feather) V62/160 which is about 62" diameter with 24" pitch climb.

The Guy is in Las Vegas and wants $5k.

It is in great condition and has 400 hrs on it.

They get overhauled every 1000 hrs for certified aircraft or 5 years which ever happen first.

Its a decent price as a new one costs 10k and an overhaul is 2,400 normally to keep it certified.

If anyone is interested I'll post the guys email.

--------------------
Ray
RF4D #4057 N-1771 Rectimo 1400cc
http://picasaweb.google.com/jb92563/FournierRF4D
http://www.touringmotorgliders.org

milnerd
Corporal

Gender: Male
Location: Long Valley, NJ
Registered: Dec 2006
Status: Offline
Posts: 29

Click here to see the profile for milnerd Send email to milnerd Send private message to milnerd Find more posts by milnerd Edit or delete this message Reply w/Quote
Posted Monday, August 1, 2011 @ 02:43 PM  

Hi Ray,

On your Grob how many rpm change did you see for one increment change on the pitch?

I have started running up the Walter Mikron in the Vivat in preparation for flying it (very soon I hope). I have been told that 2,350 rpm static will get you to the 2,600 rpm redline at the best climb speed of 54 knots. I am seeing 2,300 rpm static and am wondering whether I should go through the effort to make the pitch one notch finer before I fly it or wait until I see how many rpm I see in the climb.

Best regards

Dave

jb92563
Second Lieutenant

Gender: Male
Location: Lake Elsinore, CA, USA
Registered: Mar 2007
Status: Offline
Posts: 583

Click here to see the profile for jb92563 Visit http://picasaweb.google.com/jb92563 Send email to jb92563 Send private message to jb92563 Find more posts by jb92563 Edit or delete this message Reply w/Quote
Posted Monday, August 1, 2011 @ 04:07 PM  

The cruise pitch is about 2300 rpm and the climb pitch gets 2900 rpm.

These are static on the ground rpm's.

So thats ~600 rpm difference.

That translates to a good 400+ fpm climb at about 55 kts at 80F and 1250 ASL.

For 50 rpm I would try it first and see what you get before trying to adjust the pitch lower.

It would take quite a few 1/12ths increments to make a noticeable change. Perhaps 1/12th to make a 5 rpm change.

My redline is ~ 3400 rpm.

[Edit by jb92563 on Monday, August 1, 2011 @ 04:13 PM]

--------------------
Ray
RF4D #4057 N-1771 Rectimo 1400cc
http://picasaweb.google.com/jb92563/FournierRF4D
http://www.touringmotorgliders.org

Post New Topic   Post A Reply Jump to:
Contact Us | cfiamerica.com | Privacy Policy All times are GMT -4 Hours.
Welcome to The Fournier Forum, Guest!  
Login
Username :
Password :
In order to fully utilize the abilities of this board, you are required to register as a member. Registration is free, and allows you to do lots of things including turning on or off certain features of this board. Register now!
Forum Rules & Description
Who Can Read The Forum? Any registered user or guest
Who Can Post New Topics? Any registered user
Who Can Post Replies? Any registered user
Who Can Edit Posts? Any original author
Propellers for motorgliders
Currently Active Users: 20
There are currently 0 members and 20 guests on the boards. | Most users ever online was 822 on 08-01-2020 10:15 PM
Search This Forum
Search Keywords: Search From:
Powered by CuteCast v2.0 BETA 2
Copyright © 2001-2003 ArtsCore Studios