Posted by jb92563 on Tuesday, April 20, 2010 @ 05:43 PM:
The leading edge of my wing has the Stall Warning device.
However my warning goes off at 65mph and is not near the real stall.
Does anyone know how to adjust it properly to trigger at a lower airspeed.
It seems to have a bit of adjustment range but I can not seem to make it trigger any lower than 65mph.
Do I move the vane down to lower the trigger point?
--------------------
Posted by Bob Grimstead on Tuesday, April 20, 2010 @ 08:47 PM:
Hi Ray,
Yes, that's what you do.
If you get to the end of the adjustment slots, you might have to elongate the slots, or maybe slightly bend the vane.
Mine activate at about 5 knots/mph above the level, slow deceleration (one knot per second) stall.
Yours, Bob
Posted by eugenio on Wednesday, April 21, 2010 @ 03:33 PM:
You must put it down. If you cannot, you must (very carefully) bent the tongue downwards.
Eugenio
