New Forum
THIS FORUM IS NOW CLOSED/REPLACED DUE TO LACK OF TECHNICAL SUPPORT. YOU MAY STILL BROWSE AND READ POSTS, BUT YOU MAY NOT POST OR REPLY. YOUR CURRENT PASSWORD SHOULD WORK ON THE NEW SITE.

Please visit the new forum at New Fournier Forum

Important notice
Please remember that people from all over the world read and post on this forum, and that every country has its own rules, regulations and standards. This forum is based in the USA and so much of the information posted here is for the benefit of people who operate aircraft in the experimental/exhibition or experimental/racing categories. Advice given on this forum may be region specific. A person from Europe, for example, may make suggestions perfectly appropriate for a U.S reader, although not acceptable in his home country!

Please take this into account and carefully consult the authorities, standards and approved documentation where you fly.
Fournier Forums Upload picture | User Cp  |  Register  |  Members  |  Search  |  Help
    |- Fournier Aircraft > Maintenance Post New Topic   Post A Reply
Jumpy Alitmeter? Check your static line printer friendly version
next newest post | next oldest post
Author Messages
Bob Grimstead
Unregistered

Posted Tuesday, February 1, 2011 @ 06:08 AM  

Hi Guys,

I just found this old photo that explains quite a lot.

When I bought G-AWGN, Wagon, or the Red One, there was a whole bunch of things wrong with it.
Some I have already mentioned, like all the loose objects in the fuselage.

Another problem was that the altimeter seemed to lag a lot, and often jumped fifty feet or so when I was going vertically up or down, despite checking out OK on the calibration rig.
I wasn't too sure about the ASI either.

So, to save a lot of work removing the instrument panel, I stuck my new mobile phone (cell phone) up behind it and took a few photos.
This one shows precisely what the problem was.
It's the static line coming off the back of the altimeter.
So of course, I had to remove the panel anyway!

Notice that, as well as being kinked so tightly against the fuel tank that there was very little pressure getting to and from the intrument, the line was not secured (clipped) in any way, and there was nothing to prevent it vibrating and abrading its way into the fuel tank.

Great maintenance eh?

It was easily fixed by replacing the altimeter by one with a shorter tube out of the back.
Needless to say, the static line is now properly secured, too.

Yours, Bob

[Edit by Bob Grimstead on Tuesday, February 1, 2011 @ 06:08 AM]

--------------------

Post New Topic   Post A Reply Jump to:
Contact Us | cfiamerica.com | Privacy Policy All times are GMT -4 Hours.
Welcome to The Fournier Forum, Guest!  
Login
Username :
Password :
In order to fully utilize the abilities of this board, you are required to register as a member. Registration is free, and allows you to do lots of things including turning on or off certain features of this board. Register now!
Forum Rules & Description
Who Can Read The Forum? Any registered user or guest
Who Can Post New Topics? Any administrator or moderator
Who Can Post Replies? Any administrator or moderator
Who Can Edit Posts? Any original author
Tips for maintaining Fournier Motor gliders
Currently Active Users: 559
There are currently 0 members and 559 guests on the boards. | Most users ever online was 42535 on 04-07-2026 02:43 AM
Search This Forum
Search Keywords: Search From:
Powered by CuteCast v2.0 BETA 2
Copyright © 2001-2003 ArtsCore Studios