Fournier Forums | Thread - Oil pumps with tacho drive

New Forum

THIS FORUM IS NOW CLOSED/REPLACED DUE TO LACK OF TECHNICAL SUPPORT. YOU MAY STILL BROWSE AND READ POSTS, BUT YOU MAY NOT POST OR REPLY. YOUR CURRENT PASSWORD SHOULD WORK ON THE NEW SITE.

Please visit the new forum at New Fournier Forum

Important notice

Please remember that people from all over the world read and post on this forum, and that every country has its own rules, regulations and standards. This forum is based in the USA and so much of the information posted here is for the benefit of people who operate aircraft in the experimental/exhibition or experimental/racing categories. Advice given on this forum may be region specific. A person from Europe, for example, may make suggestions perfectly appropriate for a U.S reader, although not acceptable in his home country!

Please take this into account and carefully consult the authorities, standards and approved documentation where you fly.

Fournier Forums

\|- Fournier Aircraft > Engines	Post New Topic Post A Reply
Oil pumps with tacho drive	printer friendly version next newest post \| next oldest post

Author	Messages
cooperman Unregistered	Posted Wednesday, November 26, 2008 @ 04:00 PM I am sure these must be pretty hard to get now but does anyone know of a source of oil pump with the worm drive take off for the tacho? Thanks Paul.
Collin Unregistered	Posted Wednesday, November 26, 2008 @ 07:34 PM Here is a tach drive oil pump for sale in France. They only work with the newer 4 bolt dished camshaft. (same pump used by Limbach) They also can be bought from VW, they are used on the industrial engines. (VW part # 126 115 103 B) http://www.thesamba.com/vw/classifieds/detail.php?id=691349
eugenio Unregistered	Posted Friday, November 28, 2008 @ 01:32 PM I just wish to correct Collin's statement, the tach drive works with any kind of pump, three or four rivets, the only difference is in the main gear, that must have the second small gear on top to drive the spindle of the tacho drive. On my Rectimo I have a 26mm 3 rivet pump with the tacho drive, it is a brasilian made new oil pump for 3 rivets cam, then I bought a gear from Limbach (the gear is the same on 3 or 4 rivets) and used the original plate with the drive. Eugenio

Post New Topic Post A Reply

Jump to:

All times are GMT -4 Hours.

Welcome to The Fournier Forum, Guest!

Username	:
Password	:

In order to fully utilize the abilities of this board, you are required to register as a member. Registration is free, and allows you to do lots of things including turning on or off certain features of this board. Register now!

Forum Rules & Description

Who Can Read The Forum? Any registered user or guest
Who Can Post New Topics? Any administrator or moderator
Who Can Post Replies? Any administrator or moderator
Who Can Edit Posts? Any original author

Discussions on all engine related matters

Currently Active Users: 158

There are currently 0 members and 158 guests on the boards. | Most users ever online was 42535 on 04-07-2026 02:43 AM

Search This Forum

Search Keywords:	Search From: